Awasome How To Light Pilot On Water Heater 2023

Web How To Turn Your Water Heater Pilot Light Back On.

The pilot is usually found at the base of the water heater, below the gas control valve, and behind a rectangular access panel. If your pilot flame went out on your gas water heater, relight it first before you start replacing parts. First up, set the temperature control knob to the off position.

Web Things You’ll Need For This Guide.

Before you relight your pilot light, the first step is to turn off the gas. Next, press the ignition button repeatedly for 40 seconds while still pressing down on the gas knob. Web look through the glass panel and make sure the blue flame is showing.

Once You’ve Found It, Use A Long Lighter To Reach The Pilot Light And Turn It Off.

Web why your pilot light keeps going out how to fix with pictures Web light the pilot: Check whether the flame and heater is on.

But First, Check For A Gas Leak.

You will hear the clicking sound of the. Web pilot mode is what some people refer to as the “standby” or “sleep” setting for your hot water system. Keep the knob or pilot button pressed down as you relight the burner with a utility lighter.

Locate The Gas Valve On Your Hot Water Heater And Turn It To The “Off” Position.

This can usually be done by flipping a switch on the side of the unit. Keep holding down the pilot knob or button. You must have the pilot lit and the burner on to test for leaks, so that gas is flowing through the large tube.